A company specializing in metal materials and processing CS Metal is a company specializing in metal materials and processing
that supplies materials and parts of home appliances such as Samsung Electronics.

AL1000

AL1000

  • Pure aluminum has low strength but excellent weldability and corrosion resistance.
  • It is highly pure aluminum and has excellent corrosion resistance.

AL1085

Si 　 Fe 　 Cu 　 Mn 　 Mg 　 Cr 　 Zn 　 Ga,V,Ni,B,Zr etc Ti 　 etc Al
Each Sum
Less than 0.10 Less than 0.12 Less than 0.03 Less than 0.02 Less than 0.02 - Less than 0.03 Less than Ga 0.03
Less than V 0.05		 Less than 0.02 Less than 0.01 - More than 99.85
Tendency Tensile strength Corrosion resistance Plasticity Cutting properties Welding Surface treatment
H112 D A A - A -
H12 D A A - A -
H14 D A A - A -
H16 C A A - A -
H18 C A A - A -
H22 D A A - A -
H24 D A A - A -
H26 C A A - A -
HO D A A - A -
  • Tensile strength-A:295N/mm2 or more B:195-295N/mm2 C:100-195N/mm2 D:100N/mm2 or less
  • Corrosion resistance-A:No problem B:Outdoor non-treatment C:Outdoor corrosion prevention treatment D:Complete corrosion prevention treatment is required
  • Plasticity-A:No problem B:Need some attention C:Need special attention D:Not practical
  • Cutting properties-A:No problem B:Need some attention C:Need special attention D:Not practical
  • Welding-A: No problem B: Special caution required but weldable C: Not practical
  • Surface treatment-A:No problem B:Need some attention C:Need special attention

AL1080

Si Fe Cu Mn Mg Cr Zn Ga,V,Ni,B,Zr etc Ti etc Al
Each Sum
Less than 0.15 Less than 0.15 Less than 0.03 Less than 0.02 Less than 0.02 - Less than 0.03 Less than Ga 0.03
Less than V 0.05		 Less than 0.03 Less than 0.02 - More than 99.80
Tendency Tensile strength Corrosion resistance Plasticity Cutting properties Welding Surface treatment
H112 D A A - A -
H12 D A A - A -
H14 D A A - A -
H16 C A A - A -
H18 C A A - A -
H22 D A A - A -
H24 D A A - A -
H26 C A A - A -
HO D A A - A -

AL1070

Si Fe Cu Mn Mg Cr Zn Ga,V,Ni,B,Zr etc Ti etc Al
Each Sum
Less than 0.20 Less than 0.25 Less than 0.04 Less than 0.03 Less than 0.03 - Less than 0.04 Less than V 0.05 Less than0.03 Less than 0.03 - More than 99.70
Tendency Tensile strength Corrosion resistance Plasticity Cutting properties Welding Surface treatment
H18 C A B D A A
H24 C A A D A A
HO D A A D A A

AL1050 [ 1050A is a type that's slightly higher level than 1050 ]

Si Fe Cu Mn Mg Cr Zn Ga,V,Ni,B,Zr etc Ti etc Al
Each Sum
Less than 0.25 Less than 0.40 Less than 0.05 Less than 0.05 Less than 0.05 - Less than 0.05 Less than V 0.05 Less than 0.03 Less than 0.03 - More than 99.50
Tendency Tensile strength Corrosion resistance Plasticity Cutting properties Welding Surface treatment
H14 C A A D A A
H18 C A B D A A
H24 C A A D A A
HO D A A D A A

AL1060 [ 1060P is used only for semiconductors. ]

Si Fe Cu Mn Mg Cr Zn Ga,V,Ni,B,Zr etc Ti etc Al
Each Sum
Less than 0.25 Less than 0.35 Less than 0.05 Less than 0.03 Less than 0.03 - Less than 0.05 Less than V 0.05 Less than 0.03 Less than 0.03 - More than 99.60
Tendency Tensile strength Corrosion resistance Plasticity Cutting properties Welding Surface treatment
H18 C A B D A A
H24 C A A D A A
HO D A A D A A
  • It has high electrical conductivity, so it's used for power transmission and distribution.
  • Low strength and not suitable for structural use.

AL1100

Si Fe Cu Mn Mg Cr Zn Ga,V,Ni,B,Zr etc Ti etc Al
Each Sum
Sum More than 0.95 Less than 0.05~0.20 Less than 0.05 - - Less than 0.10 - - Less than 0.05 0.15 More than 99.00
Tendency Tensile strength Corrosion resistance Plasticity Cutting properties Welding Surface treatment
H14 C A A D A A
H18 C A B D A A
HO D A A D A A
  • Out of pure aluminum, a product with low purity.

AL1200

Si Fe Cu Mn Mg Cr Zn Ga,V,Ni,B,Zr etc Ti etc Al
Each Sum
Sum More than 1.0 Less than 0.05 Less than 0.05 - - Less than 0.10 - Less than 0.05 Less than 0.05 Less than 0.15 More than 99.00
  • Out of pure aluminum, a product with low purity.

AL1N30

Si 　 Fe 　 Cu 　 Mn 　 Mg 　 Cr 　 Zn 　 Ga,V,Ni,B,Zr etc Ti 　 etc Al
Each Sum
Sum More than 0.7 Less than 0.10 Less than 0.05 Less than 0.05 - Less than 0.05 - - Less than 0.03 - More than 99.30
  • It has excellent electrical flammability and corrosion resistance, and is mainly used for aluminum foils.